Art Primo Graffiti Forums

[GABEMEDS]

heh

[vice]

truthfully,i skip most of his posts...

you are a stronger man than I.

[REIM_NT]

WARNING: DO NOT ATTEMPT TO USE THIS CHEMICAL MIXTURE INDOORS (unless area is properly ventilated) THE FUMES CREATED WHEN MIXED WITH METAL ARE TOXIC! When handling the mixture, rubber gloves, safety goggles and a respirator are highly recommended!

METAL ETCH RECIPE:
You will need the following
- 70% solution of Chloric Triphosphorus (in liquid form)
- Plastic container and a metal pot that the plastic container could fit in *optional
- A standard 12 V, 40 Ah Lead-acid car battery *optional
- Rubber gloves, safety goggles, respirator, apron (recommended)
- A plastic mop with tons of extra tips
- Some heavy duty garbage bags (contractor types work fine)
- Roll of paper towels

Lay out some of the garbage bags in your work area and have a bunch of paper towels ready. In case of an accident, DO NOT dump this mixture down your drain as it will RUIN your metal pipes. Just soak it all up w/ paper towel and dispose of in garbage bag. You can actually use that 70% (you can even use a higher %, but it really makes no difference) solution of Chloric Triphosphorus in your mop directly but it won't give you that rust effect on the metal that forms the next day.

To get that rust effect, you need to get that battery acid involved. I won't go into detail about how to get the acid out of the car battery (I believe it can be used/un-used although I'm not 100% sure) but you can figure that out yourself. You only need about a 90% (Chloric Triphosphorus) / 10% (Battery Acid) mixture. Adding too much battery acid will actually weaken the effect. Pour the mixture into the plastic container and then submerge the plastic container into a pot of boiling water to heat it up. DO NOT pour the mixture directly into the metal pot for obvious reasons. Let it cool and dump the mixture into a mop. This mixture works on all types of metals w/ different effects on different types (of metal.)

[vice]

so many kids are gonna get f*cked up.

[REIM_NT]

[Shaolin Ups]

If I wore gloves, would the etch burn threw like a ciggarette ? or could I have time to rip the glove off and throw it ?

[resk630]

haha. i would erase that post....and i dont know why so many kids wanna f*ck with etch...just use some good ol paint markers or paint filled mop and when it gets buffed redo that sh*t.

[SENTONE]

If I wore gloves, would the etch burn threw like a ciggarette ? or could I have time to rip the glove off and throw it ?

no it wont

[vice]

Etch will do nothing to plastics, that's why you put it in plastic markers.

[Shaolin Ups]

Etch will do nothing to plastics, that's why you put it in plastic markers.

I thought... etch and plastic was a no no...


Well i'm putting it in a 15 valve system marker. If I thin it down with what you told me to vice, will it flow threw the nib ? Or am I better off using a mop ?

[vice]

mop.

[Shaolin Ups]

mop.

It won't burn threw ? the only chance of gettting it on me is while filling it, and the drips or over squeezing ?

[vice]

THE ONLY THING YOU CAN PUT ETCH IN IS PLASTIC.

You should probably research this sh*t before you use it. Seeing as it can cause cardiac arrest.

[Shaolin Ups]

THE ONLY THING YOU CAN PUT ETCH IN IS PLASTIC.

You should probably research this sh*t before you use it. Seeing as it can cause cardiac arrest.

I know, I'm not trying it until I get the facts about it. Thats why I've been asking so much about it. I racked 2 bottles and don't wanna burn my f*cking hands off.

If you do, could you post a pic of etch in a mop ? Cause You must have one if you know all of this.

[vice]

dude, you mix it and put it in a mop.

I don't have one to take a pic of.

[Shaolin Ups]

dude, you mix it and put it in a mop.

I don't have one to take a pic of.

I was just curious man. I found a pic of etch bath in a mop, its all brown and sh*tt like sh*t haha.

I'm gunna slap on a bandana, go outside and mix this sh*t in a water bottle. One last question, you said red wine would work best, right ?

[vice]

..no. ?

[SENTONE]

i got etch in my mini crusher

[gnashgfx]

Etch will do nothing to plastics, that's why you put it in plastic markers.

Although it works on plexiglass.

[STARK517]

I wish I still had it so I could take a pic...

But back when I did detail work at a car dealership...

With the cars, they'd sell this additional anti-theft package where you'd buy a specific code that we'd etch onto your windows. Basically, the code was on this piece of blue tape with little holes/cuts where the text was, and we had this etch cream that you'd roll over the aforementioned tape, let sit for a minute or two. Rip the tape off and the number was etched onto the window.

I used to rack that sh*t by the boxful and tear up windows wherever I went, and left lasting etches that I still see around whenever I go back home. The sh*t tingled a little bit if you got some on your skin(washed off extremely easily), but nothing CLOSE to the horrors of the etch we all know and love(hate?). it came in like little 3 oz. bottles in a marker type thing similar to the drip mop mini's.

So if I were a writer looking for some decent NON hand deforming etch, I'd try to find a friend who works in the detail section of a new car dealership.